1967 or 1968 Mustang-Cougar Air Conditioning
Perfect Fit ELITE™
A/C, Heat and Defrost. For non factory air & factory air vehicles.
This model specific
Perfect Fit ELITE™ system allows you to retrofit an original, standard, 1967-68 Mustang with full air-conditioning. Our system is engineered specifically to use the original 1967-68 Mustang heater or air conditioning controls using our simple EZ Cable integrators and EZ Wire system. The new fully electric
Perfect Fit ELITE™ system uses our ECU to allow infinite adjustability over all modes, providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning and defrost connect to the original heater-defrost diffusers.
Installation's a Breeze!
The 1967-68 Mustang
Perfect Fit ELITE™ air conditioning system is designed specifically to bolt into your 1967-68 Mustang with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.
Not Just Aftermarket Air Conditioning!
Classic Auto Air's
Perfect Fit ELITE™ model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.
Perfect Fit ELITE™ 1967-68 Mustang air conditioning system is engineered to actually fit a 1967-68 Mustang, not a single unit that is adapted to fit a whole product line like competitors. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C/Heat coils often found on aftermarket systems. By using separate coils we improve the cooling and heating capacity of the total system. This makes you cooler much faster!
Want to Customize Your Solution?
Perfect Fit™ is the perfect solution for most of our customers, but we've helped many customers develop custom solutions, from hose placements, to smooth firewalls, to you-name-it, to create a personalized air conditioning solution that's just right for them. Want to
pimp your ride? Don't just order the standard kit. Give us a call and let us help you customize your solution.
Have A Question?
Ask the CAA Car Guys
- or -
Fill out the form below:
Complete Perfect Fit ELITE™ Air Conditioning Kit $1,479
Typical kit. Not necessarily updated with all design improvements.
Perfect Fit ELITE™ 1967-68 Mustang-Cougar A/C system
comes complete with:
• All interior components
• Evaporator assembly
• Condenser kit including pre-engineered condenser mounting
• Pre crimped refrigeration hoses
• Sanden-style compressor
• Hi-Low refrigerant pressure switch for compressor protection
• Aluminum hookup tubes.
• Compressor mounting hardware
• Installation instructions and mounting template
All at a discounted complete kit price.
Our standard louvers are designed to replicate factory original air conditioning.
EZ Cable Integrators
Easily adapt to your control head
The system is controlled using the original heater control panel for all of the air diverter doors and air temperature changes.
Pre crimped refrigeration hoses. Hi-Low refrigerant pressure switch for compressor protection
Pre engineered condenser mounting for ease of installation
Pre engineered aluminum tubes for a clean engine compartment
Complete System (non-factory air & factory air Mustangs):
Complete System (non-factory air & factory air Mustangs): $1,479
Part# 20-303(non-factory air) 20-304(factory air)
The ultimate in modern, high performance air conditioning.
Buy our Complete System and get your compressor and everything in the Evaporator, Condenser and Compressor Mount Kits, all at a discounted price.
Evaporator Kit (non-factory air):
Evaporator Kit (non-factory air): $925
Everything you need for the passenger compartment.
Includes the heat, A/C, and defrost evaporator, all duct hose, EZ Cable Integrators, blower switch and wiring, louvers, defrost ducts, mounting hardware and templates for installation. Standard kit operates using your factory original heater controls.
Condenser Kit Only:
Condenser Kit Only: $349
Mounts in front of the radiator. We have taken the time to design each condenser kit for model specific bolt on application. Includes all hoses/fittings, drier with hi-low safety switch, drier bracket, condenser with pre-engineered mounting brackets and aluminum tubes, and an o-ring assortment kit for easy installation.
Compressor Only: $225
Classic Auto Air uses Sanden-style compressors for all our Perfect Fit kits. Customize to your situation by choosing from chrome, polished, standard cast, rear discharge and top discharge.
Evaporator Kit (factory air vehicle):
Evaporator Kit (factory air vehicle): $925
Everything you need for the passenger compartment.
Includes the heat, A/C, and defrost evaporator, all duct hose, EZ Cable Integrators, blower switch and wiring, louver adapters, defrost ducts, mounting hardware and templates for installation. Standard kit operates using your factory original air conditioning controls.
Download a complete installation manual in a PDF (Portable Document Format) file format. Please note: Templates are not drawn to scale.
To work with the PDF files, you will need Adobe Acrobat Reader. if you do not have Acrobat, you may download it here: http://www.adobe.com/prodindex/acrobat/readstep.html
With the purchase of a 1967-68 Mustang-Cougar
Perfect Fit ELITE™ complete system, we recommend that you also buy the following:
When adding A/C be sure that you have the correct pulleys to drive the compressor. Classic Auto Air has a complete line of pulleys available in several different finishes.
We recommend that you upgrade your engine fan to offset the addition of A/C. Contact your sales rep for more information.
Consider these Options to Personalize Your Solution
Consider the following options when you purchase your 1967-68 Mustang-Cougar
Perfect Fit ELITE™ complete system:
Our cable operated controls are a perfect alternative to your stock controls. Available in several different finishes.
Electronic Control Kit
Use this kit and convert our cable operated system to fully electronic controls using your choice of billet controls
Classic Auto Air has several different shapes, sizes and finishes of louvers to match your style
Upgraded Mounting Kit
We also carry a complete line of upgraded mounting kits from manufacturers like Billet Specialities, Bills Brackets and more
Matching Alternator-Power Steering Kits
We also sell matching alternator and power steering kits to keep your engine compartment looking good
Upgrade your standard black rubber hoses to beautiful stainless braid with polished fittings
Chrome drier with billet bracket available for many of our systems
Use an electric fan for city or parade driving or when there's not enough space for a standard mechanical fan. We carry a complete line of Spal fans from 9" - 16" in all different CFM ratings