|
|
1967-68 Mustang / Cougar
- All Interior Components
- Condenser And Hose Assemblies
- Sanden Style Compressor
- Engine Mounting Brackets
- Complete detailed installation instructions
|
 |
CLASSIC AUTO AIR has designed the model specific systems to fit a original standard heat only vehicle. If your vehicle is equipped with FACTORY AIR there is an AUXILARY KIT that includes all the necessary components to adapt our system to the factory controls and dash louvers.
This system is engineered specifically for the 67-68 Mustang with in dash a/c outlets, defrost connects to the original heater defrost diffusers.
|
 |
|
The system is controlled using the original heater control panel for all of the air diverter doors and air temperature changes. |
 |
|
 |
|
 |
| Pre crimped refrigeration hoses. Hi-Low refrigerant pressure switch for compressor protection. |
|
Pre engineered condenser mounting and Aluminum hookup tubes. |
Our "Complete System" includes the evaporator
assembly, condenser
kit, compressor and the compressor mounting kit at a discounted price.
|
| Complete System: |
$1,199.00
|
Part# 20-184 (R134) 20-180 (R12) |
| Evaporator Assembly only: | $745.00 | Part# 1-1026 |
| Condenser Kit only: | $299.00 | Part# 11-2002B |
| Compressor only: | $220.00 | Part# 5-128 (R134) 5-107 (R12) |
| | Polished Compressor - Add $69.00 |
| Compressor Mount only: |
Price based on Engine
|
| Factory Air Conversion Kit: | $149.00 | Part# 1-1501 |
Installation Instructions
Instructions are in Adobe Acrobat PDF format |
|
|
OPTIONS AVAILABLE
| Engine Fans |
These high-quality, all steel fans have the appearance of original equipment. Heavy-duty 28° pitch, 6-blade design will move a large volume of air. Replacing the stock fan is a must if it is a 4-blade design or a 5 or 6 blade designed with less pitch. Fan spacers are readily available from most auto suppliers or we would be glad to supply them in any length you request.
16" 6-Blade. . . . . . . . . . . . . . . (9-112) $49.90
17" 6-Blade. . . . . . . . . . . . . . . (9-113) $49.90
|
|
|
Note: Our company has no control over installation of optional fan blades with
regard to fan clearance and/or engine movement that could cause the fan to damage
other components. No payment for damaged parts will be made. The fan will be
replaced for defects in workmanship or materials ONLY. Always measure carefully
and check the condition of the engine mounts.
|
|
Small Block Ford Black & Chrome Pulleys
|
Note: water pump pulley part# 7-126 required for 289/302 engines with power steering.
Street Rod AC |
classic & vintage air conditioning |
Street Rod A/C |
Street Rod Air Conditioning |
Corvette AC |
Chevelle AC |
Mustang AC |
Thunderbird AC |
Camaro AC |
|
