|
|
877.342.5526 |
 |
 |
 |
 |
 |
|
|
|
Classic Auto Air's "Perfect Fit Systems" are not another Aftermarket System. These RETROFIT designs give OE quality, performance, and reliability.
Because of "CLASSIC AUTO AIR's" 28 year commitment to the classic car industry we are constantly expanding product line to include most cars and trucks from the 1940's to the 1970's. |
 |
 |
Experienced engineering allows us to design custom air conditioning for almost anything on wheels. The "Perfect Fit Systems" are designed to bolt into the vehicle with minimum modification to the vehicle. In some cases only (1) hole needs to be drilled in the car. |
The "PERFECT FIT" systems are designed to use the original heater controls and provide air conditioning out the dash louvers, heat on the floor, and dehumidified defrost.
 |
|
 |
|
The "PERFECT FIT" product comes standard with every thing you need to "RETROFIT" your classic with the latest and best designed CLIMATE CONTROL SYSTEM on the market today.
| The "PERFECT FIT" systems utilize pre-engineered under the hood aluminum hard line refrigerant tubes. This gives a clean and OE appearance. |
|
|
|
CLASSIC AUTO AIR's excellent reputation for uncompromised quality, component selection and attention to detail is evident in all aspects of the "Perfect Fit Systems" product line! Every component was chosen on its superior design and quality rather than a low cost. |
 Click Image to enlarge. |
Engineered with carefully sized, large separate A/C and Heat coils just like factory (OE) systems. The separate coils improve the cooling and heating capacity of the total system.
Smaller is never better when it comes to cooling a large classic vehicle. |
 Click Image to enlarge. |
All of the mode doors and shafts are 1 piece composite extrusions. This
exclusive feature allows for larger diameter bearing surface and longer service life.
All of the perfect fit systems are assembled using spring metal retainers and are screwed together to enable you to service the entire system. |
 Click Image to enlarge. |
The highest quality OEM control cables are utilized. A stainless wire glides through nylon lined housings that are pre lubricated.
Inline adjusters are used to make periodic adjustments of cables in a fraction of the time. |
 Click Image to enlarge. |
When cables are not a practical design choice, servo motors to move diverter doors are a simple and ideal solution.
CLASSIC AUTO AIR was the first of the retrofit air conditioning companies to introduce servo motor drive technology |
 Click Image to enlarge. |
State of the art High Output OEM style blower assemblies from "Spal" with heat sink speed controllers for thermal protection.
Excellent air volume with less electrical amperage. This very important when installing on older vehicles that the electrical systems are not upgraded to modern standards. |
| ADDITIONAL FEATURES |
|
|
|