910 Freeport Parkway, Suite 100 Coppell, TX 75019
+ (877) 342-5526

Model Specific Air Conditioning
1930's to 1980's Cars & Trucks
Since 1977

(0)
  • No products in the cart.

Shop

Classic Auto Air - Air Conditioning & Heating for 70’s & Older Cars & Trucks.  1956 Chevy Bel Air – Sedan Air Conditioning System
1956 CHEVROLET BEL AIR - SEDAN TRI-FIVE AC COMPLETE SYSTEM
1956 CHEVROLET BEL AIR - SEDAN TRI-FIVE AC COMPLETE SYSTEM

1956 Chevy Bel Air – Sedan Air Conditioning System

$1,399.00

WE TAKE A LOT OF PRIDE IN OUR TECHNICAL SUPPORT DEPARTMENT – WE’RE HERE FOR YOU EVERY STEP OF THE WAY.

Designed specifically for a 1956 Chevy Bel Air – Sedan, this Classic Auto Air Perfect Fit™ system will convert your factory heat-only classic to full climate control. Like all Classic Auto Air kits, each component was either specifically designed, or carefully chosen to fit your 1956 Chevy Bel Air – Sedan (that’s why it’s model-specific). This kit contains what you’ll need to get modern day, high performance A/C, heat, and dehumidified defrost into your classic. All components are of the highest quality possible… and Classic Auto Air systems are manufactured in the USA.
 
All Classic Auto Air installation kits include detailed instructions to make installation a breeze. Plus, no special tools are required and you’ll get the best warranty in the industry.
 
Your Perfect Fit™ kit comes complete with:

  • Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
  • Largest Coils in the Industry (Faster and more thorough Heat Transfer, Faster Cool-downs)
  • Separate A/C and Heat Coils, Like OEM
  • Model-Specific Brackets
  • Sanden Style Compressor
  • Condenser Kit
  • Compressor Mounting Hardware
  • Electronic Water Valve
  • Hi-Low Pressure Switch for Compressor Protection
  • Pre-crimped Refrigeration Hoses
  • DirectPass Airflow Technology
  • SPAL Fan for the Greatest Airflow
  • Fully-automatic, Preset Thermostat
  • Pre-formed Hardlines
  • Manufactured in USA
  • Fewer Connections – Less Chance for Leaks
 
Install & More Info

Product Description

Model Specific Perfect Fit™

A/C, Heat and Defrost. For non factory air & factory air vehicles.

This model specific Perfect Fit™ system allows you to retrofit an original, standard, heat-only, 1956 Chevy Bel Air – Sedan with full air-conditioning. Our system is engineered specifically to use the original 1956 Chevy Bel Air – Sedan heater controls and dash louvers while providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning and defrost connect to the original heater-defrost diffusers.

 

Installation’s a Breeze!

The 1956 Chevy Bel Air – Sedan Perfect Fit™ air conditioning system is designed specifically to bolt into your 1956 Chevy Bel Air – Sedan with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.
 

Not Just Aftermarket Air Conditioning!

Classic Auto Air’s Perfect Fit™ model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.
 
The Perfect Fit™ 1956 Chevy Bel Air – Sedan air conditioning system is engineered to actually fit a 1956 Chevy Bel Air – Sedan. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C/Heat coils often found on aftermarket systems. The separate coils improve the cooling and heating capacity of the total system.

 

INSTALLATION INSTRUCTIONS:

Chevy Sedan 55-56
KIT HIGHLIGHTS INCLUDE:

55-57chevy-bel-air-ac-systemServiceable Evaporators: All Classic Auto Air Perfect Fit Systems are assembled using spring metal retainers, and are screwed together to enable you to service the entire system (if the need ever arises). Beware of glued together units that are expensive to replace.

Coils: All Classic Auto Aircoils

systems are engineered

with carefully sized, large

separate A/C and Heat

coils just like factory (OE)

systems. The separate coils

improve the cooling and heating capacity of the total system.

spalfan

SPAL Fans: State of the art High Output OEM style blower assemblies with internal heat sink speed controllers for thermal protection. Excellent air volume with less electrical amperage. This is very important when installing on older vehicles where the electrical systems are not upgraded to modern standards.

Open and Shut Case: All of theopencase

mode doors and shafts are one

piece composite extrusions. This

exclusive feature allows for larger

diameter bearing surfaces and

longer service life. No metal doors

are utilized… which eliminates

rust-prone failures.

Tech Support: Classic Auto Air backs every system with unrivaled technical support from car guys just like you… we know them, we love them and we drive them!

QUALITY IS BUILD-IN INTO EVERY COMPONENT…EVEN PARTS THAT ARE HIDDEN OUT OF SIGHT

Reviews

Share your thoughts!

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

There are no contributions yet.

×

Login

Register

Continue as a Guest

Don't have an account? Sign Up

Contact Us