910 Freeport Parkway, Suite 100 Coppell, TX 75019
+ (877) 342-5526

Model Specific Air Conditioning
1930's to 1980's Cars & Trucks
Since 1977

(0)
  • No products in the cart.

Shop

1957 CHEVROLET 210 - SEDAN AC COMPLETE SYSTEM
1957 CHEVROLET 210 - SEDAN AC COMPLETE SYSTEM

1957 Chevy 210 – Sedan Air Conditioning System

$1,399.00

ONLY A CLASSIC AUTO AIR KIT FITS RIGHT AND PERFORMS RIGHT… DON’T SETTLE FOR ONE-SIZE FITS ALL IMITATIONS!

This Model-Specific Perfect Fit™ system has been specifically engineered to convert a factory heat-only 1957 Chevy 210 – Sedan to full climate control. Like all Perfect Fit™ kits, each component was either specifically designed, or carefully chosen to fit your 1957 Chevy 210 – Sedan. This kit is complete and contains what you’ll need to get modern day, high performance A/C, heat, and dehumidified defrost into your classic. You can also customize your kit from a wide variety of optional louvers, and we have lots of engine compartment upgrades available.
 
All installation kits include detailed, step-by-step instructions, no special tools are required, and every system is backed by the best tech-support in the industry.
 
Your Perfect Fit™ kit comes complete with:

  • Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
  • Coils Utilize Copper for Longevity
  • Ability to Retain OEM Controls
  • Sanden Style Compressor
  • DirectPass Airflow Technology
  • Best Warranty in the Industry
  • Condenser Kit
  • Compressor Mounting Hardware
  • Separate Coils for Better Performance
  • Hi-Low Pressure Switch Included
  • Pre-crimped Refrigeration Hoses
  • Flexible Duct Hoses
  • SPAL Fan for the Greatest Airflow
  • Fully-automatic, Preset Thermostat
  • Pre-formed Hardlines
  • Computer Aided Design
  • Full Technical Support
 
Install & More Info

Product Description

Model Specific Perfect Fit ELITE™

A/C, Heat and Defrost. For non factory air & factory air vehicles.

This model specific Perfect Fit ELITE™ system allows you to retrofit an original, standard, 1957 Chevy 210 – Sedan with full air-conditioning. Our system is engineered specifically to use the original 1957 Chevy 210 – Sedan heater or air conditioning controls using our simple EZ Cable integrators and EZ Wire system. The new fully electricPerfect Fit ELITE™system uses our ECU to allow infinite adjustability over all modes, providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning connects to new supplied vents and the defrost connects to new supplied defrost diffusers.
 

Installation’s a Breeze!

The 1957 Chevy 210 – Sedan Perfect Fit ELITE™ air conditioning system is designed specifically to bolt into your 1957 Chevy 210 – Sedan with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.
 

Not Just Aftermarket Air Conditioning!

Classic Auto Air’s Perfect Fit ELITE™ model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.
 
The Perfect Fit ELITE™ 1957 Chevy 210 – Sedan air conditioning system is engineered to actually fit a 1957 Chevy 210 – Sedan, not a single unit that is adapted to fit a whole product line like our competitors. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C/Heat coils often found on aftermarket systems. By using separate coils we improve the cooling and heating capacity of the total system. This makes you cooler much faster!
 

INSTALLATION INSTRUCTIONS:

Chevy Sedan 55-56
KIT HIGHLIGHTS INCLUDE:

55-57chevy-bel-air-ac-systemServiceable Evaporators: All Classic Auto Air Perfect Fit Systems are assembled using spring metal retainers, and are screwed together to enable you to service the entire system (if the need ever arises). Beware of glued together units that are expensive to replace.

Coils: All Classic Auto Aircoils

systems are engineered

with carefully sized, large

separate A/C and Heat

coils just like factory (OE)

systems. The separate coils

improve the cooling and heating capacity of the total system.

spalfan

SPAL Fans: State of the art High Output OEM style blower assemblies with internal heat sink speed controllers for thermal protection. Excellent air volume with less electrical amperage. This is very important when installing on older vehicles where the electrical systems are not upgraded to modern standards.

Open and Shut Case: All of theopencase

mode doors and shafts are one

piece composite extrusions. This

exclusive feature allows for larger

diameter bearing surfaces and

longer service life. No metal doors

are utilized… which eliminates

rust-prone failures.

Tech Support: Classic Auto Air backs every system with unrivaled technical support from car guys just like you… we know them, we love them and we drive them!

QUALITY IS BUILD-IN INTO EVERY COMPONENT…EVEN PARTS THAT ARE HIDDEN OUT OF SIGHT

Reviews

Share your thoughts!

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

There are no contributions yet.

×

Login

Register

Don't have an account? Sign Up

Contact Us