910 Freeport Parkway, Suite 100 Coppell, TX 75019
+ (877) 342-5526

Model Specific Air Conditioning
1930's to 1980's Cars & Trucks
Since 1977

(0)
  • No products in the cart.
(0)
  • No products in the cart.

Shop

Classic Auto Air - Air Conditioning & Heating for 70’s & Older Cars & Trucks.  1957 Chevy Bel Air – Sedan Air Conditioning System
1957 CHEVROLET BEL AIR - SEDAN TRI-FIVE AC COMPLETE SYSTEM
1957 CHEVROLET BEL AIR - SEDAN TRI-FIVE AC COMPLETE SYSTEM

1957 Chevy Bel Air – Sedan Air Conditioning System

$1,449.00

ONLY A CLASSIC AUTO AIR KIT FITS RIGHT AND PERFORMS RIGHT… DON’T SETTLE FOR ONE-SIZE FITS ALL IMITATIONS!

This Model-Specific Perfect Fit™ system has been specifically engineered to convert a factory heat-only 1957 Chevy Bel Air – Sedan to full climate control. Like all Perfect Fit™ kits, each component was either specifically designed, or carefully chosen to fit your 1957 Chevy Bel Air – Sedan. This kit is complete and contains what you’ll need to get modern day, high performance A/C, heat, and dehumidified defrost into your classic. You can also customize your kit from a wide variety of optional louvers, and we have lots of engine compartment upgrades available.
 
All installation kits include detailed, step-by-step instructions, no special tools are required, and every system is backed by the best tech-support in the industry.
 
Your Perfect Fit™ kit comes complete with:

  • Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
  • Coils Utilize Copper for Longevity
  • Ability to Retain OEM Controls
  • Sanden Style Compressor
  • DirectPass Airflow Technology
  • Best Warranty in the Industry
  • Condenser Kit
  • Compressor Mounting Hardware
  • Separate Coils for Better Performance
  • Hi-Low Pressure Switch Included
  • Pre-crimped Refrigeration Hoses
  • Flexible Duct Hoses
  • SPAL Fan for the Greatest Airflow
  • Fully-automatic, Preset Thermostat
  • Pre-formed Hardlines
  • Computer Aided Design
  • Full Technical Support
 
Install & More Info

Product Description

Model Specific Perfect Fit™

A/C, Heat and Defrost. For non factory air & factory air vehicles.

This model specific Perfect Fit™ system allows you to retrofit an original, standard, heat-only, 1957 Chevy Bel Air – Sedan with full air-conditioning. Our system is engineered specifically to use the original 1957 Chevy Bel Air – Sedan heater controls and dash louvers while providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning and defrost connect to the original heater-defrost diffusers.

 

Installation’s a Breeze!

The 1957 Chevy Bel Air – Sedan Perfect Fit™ air conditioning system is designed specifically to bolt into your 1957 Chevy Bel Air – Sedan with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.

Not Just Aftermarket Air Conditioning!

Classic Auto Air’s Perfect Fit™ model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.

The Perfect Fit™ 1957 Chevy Bel Air – Sedan air conditioning system is engineered to actually fit a 1957 Chevy Bel Air – Sedan. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C/Heat coils often found on aftermarket systems. The separate coils improve the cooling and heating capacity of the total system.

 

INSTALLATION INSTRUCTIONS:

Chevy Sedan 57-58
KIT HIGHLIGHTS INCLUDE:

58-chevy-impala-ac-system

Another Exclusive… Full Insulated Evaporators: All Classic Auto Air evaporator cases are fully insulated. This simple innovation is a key factor in their unbeatable performance in both cooling your classic, and heating it.

Coils: All Classic Auto Aircoils
systems are engineered with
carefully sized, large separate
A/C and Heat coils just like
factory (OE) systems. The
separate coils improve the
cooling and heating capacity
of the total system.

Model-Specific: What is “modelmodelspecific
specific?”…it’s a kit design
approach that sets Classic
Auto Air apart from all other
companies. Other companies
have a single evaporator design and they claim will fit
and cool regardless of vehicle size… let’s be realistic – a
unit that can only adequately cool a small car is not going
to be able to cool a large car. That’s why Classic has 10
different evaporator sizes and almost 70 configurations.

blockplateOpen and Shut Case: All of the

No body work needed!
Our Perfect Fit kits come with
pre-drilled block off plates that
are tailored for your vehicle. Just
bolt on and go. These plates may
seem simple but our exclusive
design allows for 100% seal from
exterior elements.

AutoCad/3D Prototyping: Classic Auto Air fully utilizes AutoCad/3D modeling in the development of new products. Our in-house design department is cutting-edge cool.

EVERY KIT INCLUDES DETAILED, 

STEP-BY-STEP INSTRUCTIONS.

Contact Us