910 Freeport Parkway, Suite 100 Coppell, TX 75019
+ (877) 342-5526

Model Specific Air Conditioning
1930's to 1980's Cars & Trucks
Since 1977

(0)
  • No products in the cart.

Shop

Classic Auto Air - Air Conditioning & Heating for 70’s & Older Cars & Trucks.  1957 Chevy Tri-5 – Sedan Air Conditioning System
1957 CHEVROLET TRI-FIVE - SEDAN AC COMPLETE SYSTEM
1957 CHEVROLET TRI-FIVE - SEDAN AC COMPLETE SYSTEM

1957 Chevy Tri-5 – Sedan Air Conditioning System

$1,449.00

WE TAKE A LOT OF PRIDE IN OUR TECHNICAL SUPPORT DEPARTMENT – WE’RE HERE FOR YOU EVERY STEP OF THE WAY.

Designed specifically for a 1957 Chevy Tri-5 – Sedan, this Classic Auto Air Perfect Fit™ system will convert your factory heat-only classic to full climate control. Like all Classic Auto Air kits, each component was either specifically designed, or carefully chosen to fit your 1957 Chevy Tri-5 – Sedan (that’s why it’s model-specific). This kit contains what you’ll need to get modern day, high performance A/C, heat, and dehumidified defrost into your classic. All components are of the highest quality possible… and Classic Auto Air systems are manufactured in the USA.
 
All Classic Auto Air installation kits include detailed instructions to make installation a breeze. Plus, no special tools are required and you’ll get the best warranty in the industry.
 
Your Perfect Fit™ kit comes complete with:

  • Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
  • Largest Coils in the Industry (Faster and more thorough Heat Transfer, Faster Cool-downs)
  • Separate A/C and Heat Coils, Like OEM
  • Model-Specific Brackets
  • Sanden Style Compressor
  • Condenser Kit
  • Compressor Mounting Hardware
  • Electronic Water Valve
  • Hi-Low Pressure Switch for Compressor Protection
  • Pre-crimped Refrigeration Hoses
  • DirectPass Airflow Technology
  • SPAL Fan for the Greatest Airflow
  • Fully-automatic, Preset Thermostat
  • Pre-formed Hardlines
  • Manufactured in USA
  • Fewer Connections – Less Chance for Leaks
 
Install & More Info

Product Description

Model Specific Perfect Fit™

A/C, Heat and Defrost. For non factory air & factory air vehicles.

This model specific Perfect Fit™ system allows you to retrofit an original, standard, heat-only, 1957 Chevy Tri-5 – Sedan with full air-conditioning. Our system is engineered specifically to use the original 1957 Chevy Tri-5 – Sedan heater controls and dash louvers while providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning and defrost connect to the original heater-defrost diffusers.

 

Installation’s a Breeze!

The 1957 Chevy Tri-5 – Sedan Perfect Fit™ air conditioning system is designed specifically to bolt into your 1957 Chevy Tri-5 – Sedan with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.
 

Not Just Aftermarket Air Conditioning!

Classic Auto Air’s Perfect Fit™ model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.
 
The Perfect Fit™ 1957 Chevy Tri-5 – Sedan air conditioning system is engineered to actually fit a 1957 Chevy Tri-5 – Sedan. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C/Heat coils often found on aftermarket systems. The separate coils improve the cooling and heating capacity of the total system.

 

INSTALLATION INSTRUCTIONS:

Chevy Sedan 57-58
KIT HIGHLIGHTS INCLUDE:

58-chevy-impala-ac-system

Another Exclusive… Full Insulated Evaporators: All Classic Auto Air evaporator cases are fully insulated. This simple innovation is a key factor in their unbeatable performance in both cooling your classic, and heating it.

Coils: All Classic Auto Aircoils
systems are engineered with
carefully sized, large separate
A/C and Heat coils just like
factory (OE) systems. The
separate coils improve the
cooling and heating capacity
of the total system.

Model-Specific: What is “modelmodelspecific
specific?”…it’s a kit design
approach that sets Classic
Auto Air apart from all other
companies. Other companies
have a single evaporator design and they claim will fit
and cool regardless of vehicle size… let’s be realistic – a
unit that can only adequately cool a small car is not going
to be able to cool a large car. That’s why Classic has 10
different evaporator sizes and almost 70 configurations.

blockplateOpen and Shut Case: All of the

No body work needed!
Our Perfect Fit kits come with
pre-drilled block off plates that
are tailored for your vehicle. Just
bolt on and go. These plates may
seem simple but our exclusive
design allows for 100% seal from
exterior elements.

AutoCad/3D Prototyping: Classic Auto Air fully utilizes AutoCad/3D modeling in the development of new products. Our in-house design department is cutting-edge cool.

EVERY KIT INCLUDES DETAILED, 

STEP-BY-STEP INSTRUCTIONS.

Reviews

Share your thoughts!

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

There are no contributions yet.

×

Login

Register

Continue as a Guest

Don't have an account? Sign Up

Contact Us