910 Freeport Parkway, Suite 100 Coppell, TX 75019
+ (877) 342-5526

Model Specific Air Conditioning
1930's to 1980's Cars & Trucks
Since 1977

(0)
  • No products in the cart.

Shop

Classic Auto Air - Air Conditioning & Heating for 70’s & Older Cars & Trucks.  1958 Chevy Bel Air – Sedan Air Conditioning System
1958 CHEVROLET BEL AIR - SEDAN AC COMPLETE SYSTEM
1958 CHEVROLET BEL AIR - SEDAN AC COMPLETE SYSTEM

1958 Chevy Bel Air – Sedan Air Conditioning System

$1,399.00

ONLY A CLASSIC AUTO AIR KIT FITS RIGHT AND PERFORMS RIGHT… DON’T SETTLE FOR ONE-SIZE FITS ALL IMITATIONS!

This Model-Specific Perfect Fit™ system has been specifically engineered to convert a factory heat-only 1958 Chevy Bel Air – Sedan to full climate control. Like all Perfect Fit™ kits, each component was either specifically designed, or carefully chosen to fit your 1958 Chevy Bel Air – Sedan. This kit is complete and contains what you’ll need to get modern day, high performance A/C, heat, and dehumidified defrost into your classic. You can also customize your kit from a wide variety of optional louvers, and we have lots of engine compartment upgrades available.
 
All installation kits include detailed, step-by-step instructions, no special tools are required, and every system is backed by the best tech-support in the industry.
 
Your Perfect Fit™ kit comes complete with:

  • Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
  • Coils Utilize Copper for Longevity
  • Ability to Retain OEM Controls
  • Sanden Style Compressor
  • DirectPass Airflow Technology
  • Best Warranty in the Industry
  • Condenser Kit
  • Compressor Mounting Hardware
  • Separate Coils for Better Performance
  • Hi-Low Pressure Switch Included
  • Pre-crimped Refrigeration Hoses
  • Flexible Duct Hoses
  • SPAL Fan for the Greatest Airflow
  • Fully-automatic, Preset Thermostat
  • Pre-formed Hardlines
  • Computer Aided Design
  • Full Technical Support
 
Install & More Info

Product Description

Model Specific Perfect Fit ELITE™

A/C, Heat and Defrost. For non factory air & factory air vehicles.

This model specific Perfect Fit ELITE™ system allows you to retrofit an original, standard, 1958 Chevy Bel Air – Sedan with full air-conditioning. Our system is engineered specifically to use the original 1958 Chevy Bel Air – Sedan heater or air conditioning controls using our simple EZ Cable integrators and EZ Wire system. The new fully electricPerfect Fit ELITE™system uses our ECU to allow infinite adjustability over all modes, providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning connects to new supplied vents and the defrost connects to new supplied defrost diffusers.
 

Installation’s a Breeze!

The 1958 Chevy Bel Air – Sedan Perfect Fit ELITE™ air conditioning system is designed specifically to bolt into your 1958 Chevy Bel Air – Sedan with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.
 

Not Just Aftermarket Air Conditioning!

Classic Auto Air’s Perfect Fit ELITE™ model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.
 
The Perfect Fit ELITE™ 1958 Chevy Bel Air – Sedan air conditioning system is engineered to actually fit a 1958 Chevy Bel Air – Sedan, not a single unit that is adapted to fit a whole product line like our competitors. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C/Heat coils often found on aftermarket systems. By using separate coils we improve the cooling and heating capacity of the total system. This makes you cooler much faster!
 

INSTALLATION INSTRUCTIONS:

Chevy Sedan 57-58
KIT HIGHLIGHTS INCLUDE:

58-chevy-impala-ac-system

Another Exclusive… Full Insulated Evaporators: All Classic Auto Air evaporator cases are fully insulated. This simple innovation is a key factor in their unbeatable performance in both cooling your classic, and heating it.

Coils: All Classic Auto Aircoils
systems are engineered with
carefully sized, large separate
A/C and Heat coils just like
factory (OE) systems. The
separate coils improve the
cooling and heating capacity
of the total system.

Model-Specific: What is “modelmodelspecific
specific?”…it’s a kit design
approach that sets Classic
Auto Air apart from all other
companies. Other companies
have a single evaporator design and they claim will fit
and cool regardless of vehicle size… let’s be realistic – a
unit that can only adequately cool a small car is not going
to be able to cool a large car. That’s why Classic has 10
different evaporator sizes and almost 70 configurations.

blockplateOpen and Shut Case: All of the

No body work needed!
Our Perfect Fit kits come with
pre-drilled block off plates that
are tailored for your vehicle. Just
bolt on and go. These plates may
seem simple but our exclusive
design allows for 100% seal from
exterior elements.

AutoCad/3D Prototyping: Classic Auto Air fully utilizes AutoCad/3D modeling in the development of new products. Our in-house design department is cutting-edge cool.

EVERY KIT INCLUDES DETAILED, 

STEP-BY-STEP INSTRUCTIONS.

Reviews

Share your thoughts!

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

There are no contributions yet.

×

Login

Register

Don't have an account? Sign Up

Contact Us