910 Freeport Parkway, Suite 100 Coppell, TX 75019
+ (877) 342-5526

Model Specific Air Conditioning
1930's to 1980's Cars & Trucks
Since 1977

(0)
  • No products in the cart.

Shop

1960 FORD PICKUP COMPLETE AC SYSTEM
1960 FORD PICKUP COMPLETE AC SYSTEM

1960 Ford Pickup Truck Air Conditioning System

$1,399.00

ALL CLASSIC AUTO AIR KITS ARE MODEL-SPECIFIC DESIGNED… THAT MAKES FOR AN EASIER INSTALLATION AND YEARS OF TROUBLE-FREE OPERATION.

Designed specifically for a 1960 Ford Pickup, this Classic Auto Air Perfect Fit™ system will convert your factory heat-only classic to full climate control. Like all Classic Auto Air kits, each component was either specifically designed, or carefully chosen to fit your vehicle (that’s why it’s model-specific). This kit contains what you’ll need to get modern day, high performance A/C, heat, and dehumidified defrost into your classic. All components are of the highest quality possible… and Classic Auto Air systems are manufactured in the USA.
 
All Classic Auto Air installation kits include detailed instructions to make installation a breeze. Plus, no special tools are required and you’ll get the best warranty in the industry.

 
Your Perfect Fit™ kit comes complete with:

  • Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
  • Largest Coils in the Industry (Faster and more thorough Heat Transfer, Faster Cool-downs)
  • Separate A/C and Heat Coils, Like OEM
  • Model-Specific Brackets
  • Sanden Style Compressor
  • Condenser Kit
  • Compressor Mounting Hardware
  • Flexible Duct Hoses
  • Hi-Low Pressure Switch for Compressor Protection
  • Pre-crimped Refrigeration Hoses
  • DirectPass Airflow Technology
  • SPAL Fans for the Best Airflow
  • Fully-automatic, Preset Thermostat
  • Pre-formed Hardlines
  • Manufactured in USA
  • Fewer Connections – Less Chance for Leaks
 
Install & More Info

Product Description

Model Specific Perfect Fit™

A/C, Heat and Defrost. For original heat only vehicles.

This model specific Perfect Fit™ system allows you to retrofit an original, standard, heat-only 1960 Ford Pickup Truck with full air-conditioning. Engineered specifically to use the original 1960 Ford Pickup Truck heater controls and dash louvers while providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning and defrost connect to the original heater-defrost diffusers.
 

Installation’s a Breeze!

The Perfect Fit™ 1960 Ford Pickup Truck air conditioning system is designed specifically to bolt into your 1960 Ford Pickup Truck with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.
 

Not Just Aftermarket Air Conditioning!

Classic Auto Air’s Perfect Fit™ model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.
 
The Perfect Fit™ 1960 Ford Pickup Truck air conditioning system is engineered to actually fit a 1960 Ford Pickup Truck. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C/Heat coils often found on aftermarket systems. The separate coils improve the cooling and heating capacity of the total system.
 

INSTALLATION INSTRUCTIONS:

Ford Pickup 57-60
KIT HIGHLIGHTS INCLUDE:

57-72fordpickupServiceable Evaporators: All Classic Auto Air Perfect Fit Systems are assembled using spring metal retainers, and are screwed together to enable you to service the entire system (if the need ever arises). Beware of glued together units that are expensive to replace.

Coils: All Classic Auto Aircoils

systems are engineered

with carefully sized, large

separate A/C and Heat

coils just like factory (OE)

systems. The separate coils

improve the cooling and heating capacity of the total system.

spalfan

SPAL Fans: State of the art High Output OEM style blower assemblies with internal heat sink speed controllers for thermal protection. Excellent air volume with less electrical amperage. This is very important when installing on older vehicles where the electrical systems are not upgraded to modern standards.

Open and Shut Case: All of theopencase

mode doors and shafts are one

piece composite extrusions. This

exclusive feature allows for larger

diameter bearing surfaces and

longer service life. No metal doors

are utilized… which eliminates

rust-prone failures.

Tech Support: Classic Auto Air backs every system with unrivaled technical support from car guys just like you… we know them, we love them and we drive them!

QUALITY IS BUILD-IN INTO EVERY COMPONENT…EVEN PARTS THAT ARE HIDDEN OUT OF SIGHT

Reviews

Share your thoughts!

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

There are no contributions yet.

×

Login

Register

Don't have an account? Sign Up

Contact Us