Model Specific Air Conditioning
1940's to 1980's Vehicles
- No products in the cart.
- No products in the cart.
1963 Ford Thunderbird Air Conditioning System
$1,499.00
WE TAKE A LOT OF PRIDE IN OUR TECHNICAL SUPPORT DEPARTMENT – WE’RE HERE FOR YOU EVERY STEP OF THE WAY.
Designed specifically for a 1963 Ford Thunderbird, this Classic Auto Air Perfect Fit™ system will convert your factory heat only classic to full climate control. Like all Classic Auto Air kits, each component was either specifically designed, or carefully chosen to fit your 1963 Ford Thunderbird (that’s why it’s model specific). This kit contains what you’ll need to get modern day, high performance A/C, heat, and dehumidified defrost into your classic. All components are of the highest quality possible… and Classic Auto Air only purchases from U.S. vendors.
All installation kits include detailed, step-by-step instructions, and customizing is a breeze. Plus no special tools are required and every system has the best warranty you’ll find anywhere.
Your Perfect Fit™ kit comes complete with:
- Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
- Largest Coils in the Industry (Faster and more thorough Heat Transfer, Faster Cool-downs)
- Separate A/C and Heat Coils, Like OEM
- Model-Specific Brackets
- Sanden Brand Compressor
- Condenser Kit
- Compressor Mounting Hardware
- Hi-Low Pressure Switch for Compressor Protection
- Pre-crimped Refrigeration Hoses
- DirectPass Airflow Technology
- SPAL Fans for the Best Airflow
- Fully-automatic, Preset Thermostat
- Pre-formed Hardlines
- Manufactured in USA
- Fewer Connections – Less Chance for Leaks
- Full Technical Support
Install & More Info
Product Description
Model Specific Perfect Fit™
A/C, Heat and Defrost. For original heat only vehicles.
This model specific Perfect Fit™
system allows you to retrofit an original, standard, heat-only, heat-only 1963 Thunderbird with full air-conditioning. Engineered specifically to use the original 1963 Thunderbird heater controls and dash louvers while providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning and defrost connect to the original heater-defrost diffusers.
Installation’s a Breeze!
The Perfect Fit™
1963 Ford Thunderbird air conditioning system is designed specifically to bolt into your 1963 Thunderbird with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.
Not Just Aftermarket Air Conditioning!
Classic Auto Air’s Perfect Fit™
model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.
The Perfect Fit™
1963 Ford Thunderbird air conditioning system is engineered to actually fit a 1963 Thunderbird. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C/Heat coils often found on aftermarket systems. The separate coils improve the cooling and heating capacity of the total system.
INSTALLATION INSTRUCTIONS:
 |
T-Bird 63
KIT HIGHLIGHTS INCLUDE:
DirectPass Airflow Technology: Classic Auto Air evaporators are AutoCad designed to maximize airflow using the exclusive DirectPass technology. This give you a greater volume of unobstructed airflow. You also benefit from larger door openings.
Coils: All Classic Auto Air
systems are engineered with
carefully sized, large separate
A/C and Heat coils just like
factory (OE) systems. The
separate coils improve the
cooling and heating capacity
of the total system.
Model-Specific: What is “model
specific?”…it’s a kit design
approach that sets Classic
Auto Air apart from all other
companies. Other companies
have a single evaporator design and they claim will fit
and cool regardless of vehicle size… let’s be realistic – a
unit that can only adequately cool a small car is not going
to be able to cool a large car. That’s why Classic has 10
different evaporator sizes and almost 70 configurations.
Open and Shut Case: All of the
No body work needed!
Our Perfect Fit kits come with
pre-drilled block off plates that
are tailored for your vehicle. Just
bolt on and go. These plates may
seem simple but our exclusive
design allows for 100% seal from
exterior elements.
AutoCad/3D Prototyping: Classic Auto Air fully utilizes AutoCad/3D modeling in the development of new products. Our in-house design department is cutting-edge cool.
EVERY KIT INCLUDES DETAILED,
STEP-BY-STEP INSTRUCTIONS.
Reviews & Discussion
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
What others are saying
There are no contributions yet.