Model Specific Air Conditioning
1930's to 1980's Cars & Trucks
Since 1977
- No products in the cart.
1967 Chevy Caprice – Sedan Air Conditioning System
$1,449.00 – $1,549.00
CLASSIC DESIGNED ALL IT’S SYSTEMS FROM THE GROUND-UP… USING MODERN DAY OEM SYSTEMS AS THE BASELINE FOR PERFORMANCE.
Designed specifically for a 1967 Chevy Caprice – Sedan, this Classic Auto Air Fully Electronic Perfect Fit ELITE™ system will convert your factory heat-only classic to full climate control. Like all Classic Auto Air kits, each component was either specifically designed, or carefully chosen to fit your 1967 Chevy Caprice – Sedan. This kit contains what you’ll need to get modern day, high performance A/C, heat, and dehumidified defrost into your classic. All components are of the highest quality possible… and Classic Auto Air systems are manufactured in the USA.
All installation kits include detailed, step-by-step instructions, no special tools are required, and every system is backed by the best tech-support in the industry.
Your Perfect Fit ELITE™ kit comes complete with:
- Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
- Largest Coils in the Industry (Faster and more thorough Heat Transfer, Faster Cool-downs)
- Separate A/C and Heat Coils, Like OEM
- Model-Specific Brackets
- Sanden Brand Compressor
- Condenser Kit
- Compressor Mounting Hardware
- Electronic Water Valve
- Hi-Low Pressure Switch for Compressor Protection
- Pre-crimped Refrigeration Hoses
- DirectPass Airflow Technology
- SPAL Fan for the Greatest Airflow
- Fully-automatic, Preset Thermostat
- Pre-formed Hardlines
- Manufactured in USA
- Fewer Connections – Less Chance for Leaks
Install & More Info
Product Description
Model Specific Perfect Fit ELITE™
A/C, Heat and Defrost. For non factory air & factory air vehicles.
This model specific Perfect Fit ELITE™
system allows you to retrofit an original, standard, 1967 Chevy Caprice – Sedan with full air-conditioning. Our system is engineered specifically to use the original 1967 Chevy Caprice – Sedan heater or air conditioning controls using our simple EZ Cable integrators and EZ Wire system. The new fully electricPerfect Fit ELITE™
system uses our ECU to allow infinite adjustability over all modes, providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning connects to new supplied vents and the defrost connects to new supplied defrost diffusers.
Installation’s a Breeze!
The 1967 Chevy Caprice – Sedan Perfect Fit ELITE™
air conditioning system is designed specifically to bolt into your 1967 Chevy Caprice – Sedan with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.
Not Just Aftermarket Air Conditioning!
Classic Auto Air’s Perfect Fit ELITE™
model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.
The Perfect Fit ELITE™
1967 Chevy Caprice – Sedan air conditioning system is engineered to actually fit a 1967 Chevy Caprice – Sedan, not a single unit that is adapted to fit a whole product line like our competitors. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C/Heat coils often found on aftermarket systems. By using separate coils we improve the cooling and heating capacity of the total system. This makes you cooler much faster!
INSTALLATION INSTRUCTIONS:
 |
Chevy Sedan 67
KIT HIGHLIGHTS INCLUDE:
Serviceable Evaporators: All Classic Auto Air Perfect Fit Systems are assembled using spring metal retainers, and are screwed together to enable you to service the entire system (if the need ever arises). Beware of glued together units that are expensive to replace.
Coils: All Classic Auto Air
systems are engineered
with carefully sized, large
separate A/C and Heat
coils just like factory (OE)
systems. The separate coils
improve the cooling and heating capacity of the total system.
SPAL Fans: State of the art
High Output OEM style blower
assemblies with internal heat
sink speed controllers for
thermal protection. Excellent
air volume with less electrical
amperage. This is very important
when installing on older vehicles where the electrical
systems are not upgraded to modern standards.
Open and Shut Case: All of the
mode doors and shafts are one
piece composite extrusions. This
exclusive feature allows for larger
diameter bearing surfaces and
longer service life. No metal doors
are utilized… which eliminates
rust-prone failures.
Tech Support: Classic Auto Air backs every system with unrivaled technical support from car guys just like you… we know them, we love them and we drive them!
QUALITY IS BUILD-IN INTO EVERY COMPONENT…EVEN PARTS THAT ARE HIDDEN OUT OF SIGHT
Reviews
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
What others are saying
There are no contributions yet.