910 Freeport Parkway, Suite 100 Coppell, TX 75019
+ (877) 342-5526

Model Specific Air Conditioning
1930's to 1980's Cars & Trucks
Since 1977

(0)
  • No products in the cart.

Shop

Classic Auto Air - Air Conditioning & Heating for 70’s & Older Cars & Trucks.  1968 Plymouth Barracuda – S Air Conditioning System
1968 PLYMOUTH BARRACUDA - S COMPLETE AC SYSTEM
1968 PLYMOUTH BARRACUDA - S COMPLETE AC SYSTEM

1968 Plymouth Barracuda – S Air Conditioning System

$1,399.00

GIVE YOUR CLASSIC MODERN DAY A/C, HEAT, AND DEFROST…EASILY INCREASING ITS VALUE AND ENJOYABILITY.

This Model-Specific Perfect Fit™ system has been specifically engineered to convert a factory heat-only 1968 Plymouth Barracuda – S to full climate control. Like all Perfect Fit™ kits, each component was either specifically designed, or carefully chosen to fit your vehicle. This kit is complete and contains what you’ll need to get modern day, high performance A/C, heat, and dehumidified defrost into your 1968 Plymouth Barracuda – S. You can also customize your kit from a wide variety of optional louvers, and we have lots of engine compartment upgrades available.
 
All installation kits include detailed, step-by-step instructions, no special tools are required, and every system is backed by the best tech-support in the industry.
 
Your Perfect Fit™ kit comes complete with:

  • Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
  • Coils Utilize Copper for Longevity
  • Ability to Retain OEM Controls
  • Sanden Style Compressor
  • DirectPass Airflow Technology
  • Best Warranty in the Industry
  • Condenser Kit
  • Compressor Mounting Hardware
  • Separate Coils for Better Performance
  • Hi-Low Pressure Switch Included
  • Pre-crimped Refrigeration Hoses
  • Flexible Duct Hoses
  • SPAL Fan for the Greatest Airflow
  • Fully-automatic, Preset Thermostat
  • Pre-formed Hardlines
  • Computer Aided Design
  • Full Technical Support
 
Install & More Info

Product Description

Model Specific Perfect Fit ELITE™

A/C, Heat and Defrost. For non factory air & factory air vehicles.

This model specific Perfect Fit ELITE™ system allows you to retrofit an original, standard, 1968 Plymouth Barracuda – S with full air-conditioning. Our system is engineered specifically to use the original 1968 Plymouth Barracuda – S heater or air conditioning controls using our simple EZ Cable integrators and EZ Wire system. The new fully electricPerfect Fit ELITE™system uses our ECU to allow infinite adjustability over all modes, providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning connects to new supplied vents and the defrost connects to new supplied defrost diffusers.
 

Installation’s a Breeze!

The 1968 Plymouth Barracuda – S Perfect Fit ELITE™ air conditioning system is designed specifically to bolt into your 1968 Plymouth Barracuda – S with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.
 

Not Just Aftermarket Air Conditioning!

Classic Auto Air’s Perfect Fit ELITE™ model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.
 
The Perfect Fit ELITE™ 1968 Plymouth Barracuda – S air conditioning system is engineered to actually fit a 1968 Plymouth Barracuda – S, not a single unit that is adapted to fit a whole product line like our competitors. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C/Heat coils often found on aftermarket systems. By using separate coils we improve the cooling and heating capacity of the total system. This makes you cooler much faster!
 

INSTALLATION INSTRUCTIONS:

Barracuda/Valiant 67-69
KIT HIGHLIGHTS INCLUDE:

acsystem-2

DirectPass Airflow Technology: Classic Auto Air evaporators are AutoCad designed to maximize airflow using the exclusive DirectPass technology. This give you a greater volume of unobstructed airflow. You also benefit from larger door openings.

Condensers: Classic Auto Air 67-68mustangcondenser

utilizes custom made state of

the art parallel flow “micro tube”

condensers. These designs are

used today on modern vehicles

to reduce head pressures and

to transfer heat more efficiently.

With dozens of custom sizes and shapes available we

tailor fit each one to your specific vehicle, making it a “Perfect Fit.”

67-68mustanglinesThe OEM look: Classic

Auto Air is the innovator in

supplying pre-bent condenser

lines. These high-quality

aluminum lines that give an

OEM appearance and speed

up installation.

All the small things…:  68-69mustangsmallthings

Classic Auto Air kits

always ship with a few

more parts than you might

actually need.. like extra

screws, zip-ties, o-rings,

and extra duct hose.

History: When you buy a Classic Auto Air system you are getting 37 years of real world, high-tech, cooling technology. You can’t beat experience!

CLASSIC AUTO AIR SYSTEMS RELY ON RECIRCULATED AIR, SO A GOOD SEALED INTERIOR IS A REAL PLUS. 

Reviews

Share your thoughts!

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

There are no contributions yet.

×

Login

Register

Don't have an account? Sign Up

Contact Us