910 Freeport Parkway, Suite 100 Coppell, TX 75019
+ (877) 342-5526

Model Specific Air Conditioning
1930's to 1980's Cars & Trucks
Since 1977

  • No products in the cart.
  • No products in the cart.


Complete Mopar B-Body A/C System designed specifically to bolt into your Mopar B-Body with minimum modification to your vehicle
Complete Mopar B-Body A/C System designed specifically to bolt into your Mopar B-Body with minimum modification to your vehicle

1969 Plymouth Belvedere Air Conditioning System



Designed specifically for a 1969 Plymouth Belvedere, this kit will convert your factory heat-only classic to full climate control. This Fully Electronic kit contains what you’ll need to get modern day, high performance A/C, heat, and dehumidified defrost into your classic 1969 Plymouth Belvedere. All components are of the highest quality possible… and Classic Auto Air only purchases from U.S. vendors. A brand new D.E.R. (Direct Electronic Replacement) control is also available, which looks greats, works seamlessly with the system, and installs in your dash with no modifications.

Also, Classic Auto Air is the exclusive distributor of U.S. made OEM quality lower dash panels and center vent louvers.

Your Perfect Fit™ kit comes complete with:

  • Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
  • Largest Coils in the Industry (Faster and more thorough Heat Transfer, Faster Cool-downs)
  • Separate A/C and Heat Coils, Like OEM
  • Model-Specific Brackets
  • Sanden Brand Compressor
  • Condenser Kit
  • Compressor Mounting Hardware
  • Electronic Water Valve
  • Hi-Low Pressure Switch for Compressor Protection
  • Pre-crimped Refrigeration Hoses
  • DirectPass Airflow Technology
  • SPAL Fan for the Greatest Airflow
  • Fully-automatic, Preset Thermostat
  • Pre-formed Hardlines
  • Manufactured in USA
  • Fewer Connections – Less Chance for Leaks

Install & More Info

Product Description

Model Specific Perfect Fit ELITE™

A/C, Heat and Defrost. For non factory air & factory air vehicles.

This model specific Perfect Fit ELITE™ system allows you to retrofit an original, standard, 1969 Plymouth Belvedere with full air-conditioning. Our system is engineered specifically to use the original 1969 Plymouth Belvedere heater or air conditioning controls using our simple EZ Cable integrators and EZ Wire system. The new fully electricPerfect Fit ELITE™system uses our ECU to allow infinite adjustability over all modes, providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning connects to new supplied vents and the defrost connects to new supplied defrost diffusers.

Installation’s a Breeze!

The 1969 Plymouth Belvedere Perfect Fit ELITE™ air conditioning system is designed specifically to bolt into your 1969 Plymouth Belvedere with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.

Not Just Aftermarket Air Conditioning!

Classic Auto Air’s Perfect Fit ELITE™ model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.

The Perfect Fit ELITE™ 1969 Plymouth Belvedere air conditioning system is engineered to actually fit a 1969 Plymouth Belvedere, not a single unit that is adapted to fit a whole product line like our competitors. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C/Heat coils often found on aftermarket systems. By using separate coils we improve the cooling and heating capacity of the total system. This makes you cooler much faster!


Heater Only


Heater Only Calibration

F/A Calibration

Belvedere 68-70


A Case for Quality: Even Classic Auto Air evaporator cases put the “competition” to shame. These cases are made from high-impact ABS and vacuum formed with an even temperature to produce a stronger case with uniform thickness and a smoother finish. Also, these evaporator cases are fully insulated… another Classic Auto Air exclusive!

Condensers: Classic Auto Aircondenser
utilizes custom made state of
the art parallel flow “micro tube”
condensers. These designs are
used today on modern vehicles
to reduce head pressures and
to transfer heat more efficiently. With dozens of custom sizes and shapes available we tailor fit each one to your specific vehicle, making it a “Perfect Fit.”


SPAL Fans: State of the art
High Output OEM style blower
assemblies with internal heat
sink speed controllers for
thermal protection. Excellent
air volume with less electrical
amperage. This is very important when installing on older vehicles where the electrical systems are not upgraded to modern standards.

Best Packaging in the Industry: Classic Auto Air is committed to making sure your new kit arrives exactly as it left our facility. That’s why we’ve gone to great length to pack every item carefully, and with lots of support.

warrentyBumper to Bumper Coverage:
The Classic Auto Air 3-Year Warranty
is nice to have – yet you
most likely won’t have
to use it. No exclusions here. We believe in what we build.





Share your thoughts!

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

There are no contributions yet.



Continue as a Guest

Contact Us

Have a question?

Ph: (877) 342-5526
Fax: (817) 442-4855
Download our catalog

Your Name (required)

Your Email (required)


Your Message