Back

1975 Ford Bronco Air Conditioning System

$1,549.00

ALL CLASSIC AUTO AIR KITS ARE MODEL-SPECIFIC DESIGNED… THAT MAKES FOR AN EASIER INSTALLATION AND YEARS OF TROUBLE-FREE OPERATION.

This Model-Specific Fully Electronic Perfect Fit Elite™ kit allows you to RetroFit your classic 1975 Bronco to full air-conditioning, easily and professionally. Our 1975 Bronco system is engineered specifically to use our Direct Electronic Replacement controls (D.E.R)….which gives you a brand new, plug-n-play control that fits right into the OEM location with no modifications! The exclusive ECU allows for infinite adjustability over all modes, providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. Using just basic tools you’ll be able to install this kit with a minimum amount of modifications. It’s easy to get OEM quality with better than original performance and reliability!

All installation kits include detailed, step-by-step instructions, and customizing is a breeze. Plus no special tools are required and every system has the best warranty you’ll find anywhere.

Your Perfect Fit ELITE™ A/C kit comes complete with:

  • Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
  • Coils Utilize Copper for Longevity
  • D.E.R backlit Controls
  • Sanden Brand Compressor
  • DirectPass Airflow Technology
  • EZ Wire Color Coding System
  • Compressor Mounting Hardware
  • Condenser Kit
  • Electronic Water Valve
  • Hi-Low Pressure Switch Included
  • Pre-crimped Refrigeration Hoses
  • SPAL Fans for the Greatest Airflow
  • Fully-automatic, Preset Thermostat
  • Pre-formed Hardlines
  • Computer Aided Design
  • Full Technical Support
Clear

Compare
SKU: 20-284-75 Categories: , , Tags: , ,
More Info

Model Specific Perfect Fit ELITE™

A/C, Heat and Defrost. For Non-Factory Air Vehicles

This model specific Perfect Fit ELITE™ system allows you to retrofit an original, standard, 1975 Bronco with full air-conditioning, heat and dehumidified defrost. Our 1975 Bronco system is engineered specifically to use our Direct Electronic Replacement controls (D.E.R)….which gives you a brand new, plug-n-play control that fits right into the OEM location with no modifications! This fully electric Perfect Fit ELITE™ A/C kit uses our ECU and EZ Wire system to allow infinite adjustability over all modes, providing you with powerful air conditioning, heat on the floor, and dehumidified defrost.

Installation’s a Breeze!

The 1975 BroncoPerfect Fit ELITE™ air conditioning system is designed specifically to bolt into your 1975 Bronco with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.

Not Just Aftermarket Air Conditioning!

Classic Auto Air’s Perfect Fit ELITE™ model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.

The Perfect Fit ELITE™ 1975 Bronco air conditioning system is engineered to fit a 1975 Bronco. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C, Heat coils often found on aftermarket systems. By using separate coils we improve the cooling and heating capacity of the total system. This makes you cooler much faster!

 

Kit Highlights

KIT HIGHLIGHTS

INTERIOR KIT HIGHLIGHTS

SERVICEABLE EVAP

All Classic Auto Air Perfect Fit Systems are assembled using spring metal retainers, and are screwed together to enable you to service the entire system (if the need ever arises). Beware of glued together units that are expensive to replace.

COILS

All Classic Auto Air systems are engineered with carefully sized, large separate A/C and Heat coils just like factory (OE) systems. The separate coils improve the cooling and heating capacity of the total system.

PRESET THERMOSTAT

You always get the absolute coldest discharge temperatures with no fumbling of knobs or adjustments... so, no coil freeze up!

SPAL FANS

State of the art High Output OEM style blower assemblies with internal heat sink speed controllers for thermal protection. Excellent air volume with less electrical amperage. This is very important when installing on older vehicles where the electrical systems are not upgraded to modern standards.

CONDENSERS

Classic Auto Air utilizes custom made state of the art parallel flow "micro tube" condensers. These designs are used today on modern vehicles to reduce head pressures and to transfer heat more efficiently. With dozens of custom sizes and shapes available we tailor fit each one to your specific vehicle, making it a "Perfect Fit".

ATTENTION TO DETAILS

Another Classic Auto Air advantage is the insistence on powder coating many of our brackets. This gives them a better finish and much longer durability. Plus, no one has more custom brackets than Classic.

OPEN & SHUT

All of the mode doors and shafts are one piece composite extrusions. This exclusive feature allows for larger diameter bearing surfaces and longer life. No metal doors are utilized... which eliminates rust-prone failures.

BUMPER TO BUMPER COVERAGE

The Classic Auto Air 3 Year Warranty is nice to have - yet you most likely won't have to use it. No exclusions here. We believe in what we build.

OEM LOOK

Classic Auto Air is the innovator in supplying pre-bent condenser lines. These are high-quality aluminum lines that give an OEM appearance and speed up installation.

DIRECTPASS TECHNOLOGY

Classic Auto Air evaporators are AutoCad designed to maximize airflow using the exclusive DirectPass technology. This give you a greater volume of unobstructed airflow. You also benefit from larger door openings.

Classic Auto Air evaporators Ford Mustang A/C Kit