1966 Chevy II Air Conditioning System

$1,499.00

OUR PERFECT FIT ELITE RETROFIT SYSTEM GIVES YOUR CLASSIC CHEVY II MODERN DAY A/C AND DEHUMIDIFIED DEFROST

This Model-Specific Perfect Fit™ system has been specifically engineered to convert a factory heat-only 1966 Chevy II to full climate control. Like all Perfect Fit™ kits, each component was either specifically designed, or carefully chosen to fit your vehicle. This kit is complete and contains what you’ll need to get modern day, high performance A/C, heat, and dehumidified defrost into your classic 1966 Chevy II. You can also customize your kit from a wide variety of optional louvers, and we have lots of engine compartment upgrades available.

All installation kits include detailed, step-by-step instructions, no special tools are required, and every system is backed by the best tech-support in the industry.

Your Perfect Fit™ kit comes complete with:

  • Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
  • Largest Coils in the Industry (Faster and more thorough Heat Transfer, Faster Cool-downs)
  • Separate A/C and Heat Coils, Like OEM
  • Model-Specific Brackets
  • Sanden Style Compressor
  • Condenser Kit
  • Compressor Mounting Hardware
  • Hi-Low Pressure Switch for Compressor Protection
  • Pre-crimped Refrigeration Hoses
  • DirectPass Airflow Technology
  • Spal Fans for the best Airflow
  • Flexible Duct Hoses
  • Fully-automatic, Preset Thermostat
  • Pre-formed Hardlines
  • Manufactured in the USA
  • Fewer Connections – Less chance for leaks

More Info

Model Specific Perfect Fit™

A/C, Heat and Defrost. For non factory air & factory air vehicles.

This model specific Perfect Fit™ system allows you to retrofit an original, standard, heat-only, 1966 Chevy II with full air-conditioning. Our system is engineered specifically to use the original 1966 Chevy II heater controls and dash louvers while providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning and defrost connect to the original heater-defrost diffusers.

Installation’s a Breeze!

The 1966 Chevy II Perfect Fit™ air conditioning system is designed specifically to bolt into your 1966 Chevy II with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.

Not Just Aftermarket Air Conditioning!

Classic Auto Air’s Perfect Fit™ model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.

The Perfect Fit™ 1966 Chevy II air conditioning system is engineered to actually fit a 1966 Chevy II. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C/Heat coils often found on aftermarket systems. The separate coils improve the cooling and heating capacity of the total system.

CUSTOMER PHOTOS

CUSTOMER SUPPORT

Classic Auto Air’s technical support is the best in the automotive industry. We provide multiple ways to get the support you need. Our support page allow you to find immediate answers to your A/C questions. From fully understanding how air conditioning works to calibrating your system to reading our professionally written documents to troubleshoot any issue you are having.

YOU MAY ALSO LIKE

MEMBRANE THERMAL INSULATOR
AND SOUND DEADENING MATERIAL

MEMBRANE HAND ROLLER

Kit Highlights

KIT HIGHLIGHTS

INTERIOR KIT HIGHLIGHTS

SERVICEABLE EVAP

All Classic Auto Air Perfect Fit Systems are assembled using spring metal retainers, and are screwed together to enable you to service the entire system (if the need ever arises). Beware of glued together units that are expensive to replace.

COILS

All Classic Auto Air systems are engineered with carefully sized, large separate A/C and Heat coils just like factory (OE) systems. The separate coils improve the cooling and heating capacity of the total system.

PRESET THERMOSTAT

You always get the absolute coldest discharge temperatures with no fumbling of knobs or adjustments... so, no coil freeze up!

SPAL FANS

State of the art High Output OEM style blower assemblies with internal heat sink speed controllers for thermal protection. Excellent air volume with less electrical amperage. This is very important when installing on older vehicles where the electrical systems are not upgraded to modern standards.

CONDENSERS

Classic Auto Air utilizes custom made state of the art parallel flow "micro tube" condensers. These designs are used today on modern vehicles to reduce head pressures and to transfer heat more efficiently. With dozens of custom sizes and shapes available we tailor fit each one to your specific vehicle, making it a "Perfect Fit".

ATTENTION TO DETAILS

Another Classic Auto Air advantage is the insistence on powder coating many of our brackets. This gives them a better finish and much longer durability. Plus, no one has more custom brackets than Classic.

OPEN & SHUT

All of the mode doors and shafts are one piece composite extrusions. This exclusive feature allows for larger diameter bearing surfaces and longer life. No metal doors are utilized... which eliminates rust-prone failures.

BUMPER TO BUMPER COVERAGE

The Classic Auto Air 3 Year Warranty is nice to have - yet you most likely won't have to use it. No exclusions here. We believe in what we build.

OEM LOOK

Classic Auto Air is the innovator in supplying pre-bent condenser lines. These are high-quality aluminum lines that give an OEM appearance and speed up installation.

DIRECTPASS TECHNOLOGY

Classic Auto Air evaporators are AutoCad designed to maximize airflow using the exclusive DirectPass technology. This give you a greater volume of unobstructed airflow. You also benefit from larger door openings.

Classic Auto Air evaporators Ford Mustang A/C Kit