Back

1969 Chevy Malibu Air Conditioning System

$1,549.00

OUR PERFECT FIT ELITE RETROFIT SYSTEM GIVES YOUR CLASSIC CHEVELLE MODERN DAY A/C AND DEHUMIDIFIED DEFROST.

This Fully Electronic, Model-Specific Perfect Fit ELITE™ system has been specifically engineered to convert a factory heat-only 1969 Chevy Malibu to full climate control. Each component was either specifically designed, or carefully chosen to fit your 1969 Chevy Malibu. This kit is complete and contains what you’ll need to get modern day, high performance A/C, heat, and dehumidified defrost into your classic. A brand new D.E.R. (Direct Electronic Replacement) control is also available, which looks greats, works perfectly, and installs in your dash with no modifications.

All installation kits include detailed, step-by-step instructions, no special tools are required, and every system is backed by the best tech-support in the industry.

Your Perfect Fit ELITE™ kit comes complete with:

  • Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
  • Coils Utilize Copper for Longevity
  • Ability to Retain OEM Controls
  • Sanden Brand Compressor
  • DirectPass Airflow Technology
  • Best Warranty in the Industry
  • Condenser Kit
  • Compressor Mounting Hardware
  • Separate Coils for Better Performance
  • Hi-Low Pressure Switch Included
  • Pre-crimped Refrigeration Hoses
  • Flexible Duct Hoses
  • SPAL Fan for the Greatest Airflow
  • Fully-automatic, Preset Thermostat
  • Pre-formed Hardlines
  • Computer Aided Design
  • Full Technical Support
Clear

Compare
SKU: 20-241-69-MALIBU Categories: , , , Tags: , ,
More Info

Model Specific Perfect Fit ELITE™

A/C, Heat and Defrost. For non factory air & factory air vehicles.

This model specific Perfect Fit ELITE™ system allows you to retrofit an original, standard, 1969 Chevy Malibu with full air-conditioning. Our system is engineered specifically to use the original 1969 Chevy Malibu heater or air conditioning controls using our simple EZ Cable integrators and EZ Wire system. The new fully electricPerfect Fit ELITE™system uses our ECU to allow infinite adjustability over all modes, providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning connects to new supplied vents and the defrost connects to new supplied defrost diffusers.

Installation’s a Breeze!

The 1969 Chevy Malibu Perfect Fit ELITE™ air conditioning system is designed specifically to bolt into your 1969 Chevy Malibu with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.

Not Just Aftermarket Air Conditioning!

Classic Auto Air’s Perfect Fit ELITE™ model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.

The Perfect Fit ELITE™ 1969 Chevy Malibu air conditioning system is engineered to actually fit a 1969 Chevy Malibu, not a single unit that is adapted to fit a whole product line like our competitors. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C/Heat coils often found on aftermarket systems. By using separate coils we improve the cooling and heating capacity of the total system. This makes you cooler much faster!

Kit Highlights

KIT HIGHLIGHTS

INTERIOR KIT HIGHLIGHTS

SERVICEABLE EVAP

All Classic Auto Air Perfect Fit Systems are assembled using spring metal retainers, and are screwed together to enable you to service the entire system (if the need ever arises). Beware of glued together units that are expensive to replace.

COILS

All Classic Auto Air systems are engineered with carefully sized, large separate A/C and Heat coils just like factory (OE) systems. The separate coils improve the cooling and heating capacity of the total system.

PRESET THERMOSTAT

You always get the absolute coldest discharge temperatures with no fumbling of knobs or adjustments... so, no coil freeze up!

SPAL FANS

State of the art High Output OEM style blower assemblies with internal heat sink speed controllers for thermal protection. Excellent air volume with less electrical amperage. This is very important when installing on older vehicles where the electrical systems are not upgraded to modern standards.

NICE EXTRA

In some cases a new evaporator unit will interfere with a factory glovebox... when this happens Classic Auto Air includes a new insert at no extra charge. Each of these replacements is specifically made for your classic, and all are molded out of high-impact, textured ABS plastic. It’s a nice extra and its shows that Classic Auto Air is watching the smallest of details.

ATTENTION TO DETAILS

Another Classic Auto Air advantage is the insistence on powder coating many of our brackets. This gives them a better finish and much longer durability. Plus, no one has more custom brackets than Classic.

OPEN & SHUT

All of the mode doors and shafts are one piece composite extrusions. This exclusive feature allows for larger diameter bearing surfaces and longer life. No metal doors are utilized... which eliminates rust-prone failures.

BUMPER TO BUMPER COVERAGE

The Classic Auto Air 3 Year Warranty is nice to have - yet you most likely won't have to use it. Noe exclusions here. We believe in what we build.

OEM LOOK

Classic Auto Air is the innovator in supplying pre-bent condenser lines. These high-quality aluminum lines that give an OEM appearance and speed up installation.

DIRECTPASS TECHNOLOGY

Classic Auto Air evaporators are AutoCad designed to maximize airflow using the exclusive DirectPass technology. This give you a greater volume of unobstructed airflow. You also benefit from larger door openings.