1966 Dodge Coronet Air Conditioning System

$1,549.00

ALL CLASSIC AUTO AIR KITS ARE MODEL-SPECIFIC DESIGNED…THAT MAKES FOR AN EASIER INSTALLATION AND YEARS OF TROUBLE-FREE OPERATION.

Designed specifically for your 1966 Coronet, this Classic Auto Air Perfect Fit™ system will convert your factory heat only classic to full climate control. Like all Classic Auto Air kits, each component was specifically designed to fit your 1966 Coronet. This kit contains what you’ll need to get modern day, high performance A/C, heat, and dehumidified defrost into your classic. All components are of the highest quality possible…

All installation kits include detailed, step-by-step instructions, and customizing is a breeze. Plus no special tools are required and every system has the best warranty you’ll find anywhere.

Your Perfect Fit™ A/C kit comes complete with:

  • Serviceable Evaporator Assembly (High Impact, Fully Insulated Housings)
  • Largest Coils in the Industry (Faster and more thorough Heat Transfer, Faster Cool-downs)
  • Separate A/C and Heat Coils, Like OEM
  • Wiring w/ new blower switch
  • Sanden Brand Compressor
  • Condenser Kit with all brackets & hardware
  • Compressor Mounting Hardware
  • Water Valve
  • Hi-Low Pressure Switch for Compressor Protection
  • Pre-crimped Refrigeration Hoses
  • DirectPass Airflow Technology
  • SPAL Fans for the Greatest Airflow
  • Fully-automatic, Preset Thermostat
  • Pre-formed Hardlines
  • Manufactured in USA
  • Fewer Connections – Less Chance for Leaks
Clear

More Info

Model Specific Perfect Fit™

A/C, Heat and Defrost. For original heat only vehicles.

This model specific Perfect Fit™ system allows you to retrofit an original, standard, 1966 Coronet with full air-conditioning. Our system is engineered specifically to use the original 1966 Coronet heater controls by providing you all new blower switch, brackets, cables and wiring to make your controls work like new. This will allow infinite adjustability over all modes, providing you with powerful air conditioning, heat on the floor, and dehumidified defrost.

Installation’s a Breeze!

The Perfect Fit™ 1966 Coronet air conditioning system is designed specifically to bolt into your 1966 Coronet with minimum modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting templates when needed.

Not Just Aftermarket Air Conditioning!

Classic Auto Air’s Perfect Fit™ model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than a low cost. Our RETROFIT designs give OE quality combined with better than original performance and reliability.

The Perfect Fit™ 1966 Coronet air conditioning system is engineered to fit a 1966 Coronet It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C, Heat coils often found on aftermarket systems. By using separate coils we improve the cooling and heating capacity of the total system. This increases the total efficiency of the A/C System by making the vehicle interior cooler much faster than other systems on the market.

 

Kit Highlights

KIT HIGHLIGHTS

INTERIOR KIT HIGHLIGHTS

SERVICEABLE EVAP

All Classic Auto Air Perfect Fit Systems are assembled using spring metal retainers, and are screwed together to enable you to service the entire system (if the need ever arises). Beware of glued together units that are expensive to replace.

COILS

All Classic Auto Air systems are engineered with carefully sized, large separate A/C and Heat coils just like factory (OE) systems. The separate coils improve the cooling and heating capacity of the total system.

PRESET THERMOSTAT

You always get the absolute coldest discharge temperatures with no fumbling of knobs or adjustments... so, no coil freeze up!

SPAL FANS

State of the art High Output OEM style blower assemblies with internal heat sink speed controllers for thermal protection. Excellent air volume with less electrical amperage. This is very important when installing on older vehicles where the electrical systems are not upgraded to modern standards.

NICE EXTRA

In some cases a new evaporator unit will interfere with a factory glovebox... when this happens Classic Auto Air includes a new insert at no extra charge. Each of these replacements is specifically made for your classic, and all are molded out of high-impact, textured ABS plastic. It’s a nice extra and its shows that Classic Auto Air is watching the smallest of details.

ATTENTION TO DETAILS

Another Classic Auto Air advantage is the insistence on powder coating many of our brackets. This gives them a better finish and much longer durability. Plus, no one has more custom brackets than Classic.

OPEN & SHUT

All of the mode doors and shafts are one piece composite extrusions. This exclusive feature allows for larger diameter bearing surfaces and longer life. No metal doors are utilized... which eliminates rust-prone failures.

BUMPER TO BUMPER COVERAGE

The Classic Auto Air 3 Year Warranty is nice to have - yet you most likely won't have to use it. Noe exclusions here. We believe in what we build.

OEM LOOK

Classic Auto Air is the innovator in supplying pre-bent condenser lines. These high-quality aluminum lines that give an OEM appearance and speed up installation.

DIRECTPASS TECHNOLOGY

Classic Auto Air evaporators are AutoCad designed to maximize airflow using the exclusive DirectPass technology. This give you a greater volume of unobstructed airflow. You also benefit from larger door openings.