Back

Membrane Thermal Insulator and Sound Dampening Material

$269.00

4 LAYERS OF PROTECTION IN THIS 2N1 EASY TO USE THERMAL INSULATION AND SOUND DAMPENING MATERIAL…

Designed specifically to block out heat and noise from the road, Membrane has quickly become the go-to Thermal Insulation and Sound Dampening material for Classic vehicles.

We quickly realized that car builders were using a standard “sound deadening” material in their builds and were unaware that it did not provide adequate temperature protection from the outside elements. This is why Membrane was developed. Each box contains 9 sheets of 18″ x 31.5″ 36 sq ft Thermal Insulator with Sound Dampening material.

FREE SHIPPING

  • Thermal Protection
  • Sound Deadening
  • 4 Layers of Protection
  • 2 N 1 Material
  • 9 Sheets per box
  • 18” x 31.5” sheets
  • 36 Sq Feet per box
  • No glue needed
  • No harsh chemicals
  • Easy Installation
  • Clean, Peel, Stick

 

MEMBRANE

Membrane focus is on Thermal Protection for ultimate heat insulation, (added sound deadening properties also). Basically, insulating the interior of vehicles. Clearly, we are a manufacturer of air conditioning systems, kits, and parts, but we noticed that most custom car builders thought the “sound dampening” material they were using also blocked out the heat. Don’t just hush it, block it!

This is not true. We know that vehicles need to be insulated for air conditioning systems to operate efficiently, therefore we designed our own thermal firewall insulation material to handle the issue, simply because there is no product offered, until now.

MEMBRANE

Membrane focus is on Thermal Protection for ultimate heat insulation, (added sound deadening properties also). Basically, insulating the interior of vehicles. Clearly, we are a manufacturer of air conditioning systems, kits, and parts, but we noticed that most custom car builders thought the “sound dampening” material they were using also blocked out the heat. Don’t just hush it, block it!

This is not true. We know that vehicles need to be insulated for air conditioning systems to operate efficiently, therefore we designed our own thermal firewall insulation material to handle the issue, simply because there is no product offered, until now.

MEMBRANE CALCULATOR

HOW MUCH MEMBRANE DO I NEED

Are you not exactly sure of how much Membrane you need for your build? Below is the Membrane calculator to get you to the number of boxes you may need. Enter the length and width (in inches) of each area you want to cover in Membrane.  You only need to input areas you want to cover in Membrane. Leave blank measurements you do not need. After you have entered all your numbers (in inches) press calculate and we will tell you the number of boxes we recommend for your vehicle.

The Membrane calculator is a tool to help you. This calculator does not consider the curves and odd shapes of the interior that you may have. This is ONLY an approximation of the number of boxes you need. The Membrane calculator does give decimal values of boxes needed. Example: If your calculation comes to 2.18 boxes you may decide that you only need 2 boxes instead of ordering a 3rd box. If your calculation comes to 2.79 boxes you might want to go ahead and order that 3rd box.

MEMBRANE CALCULATOR

HOW MUCH MEMBRANE DO I NEED

Are you not exactly sure of how much Membrane you need for your build? Below is the Membrane calculator to get you to the number of boxes you may need. Enter the length and width (in inches) of each area you want to cover in Membrane.  You only need to input areas you want to cover in Membrane. Leave blank measurements you do not need. After you have entered all your numbers (in inches) press calculate and we will tell you the number of boxes we recommend for your vehicle.

The Membrane calculator is a tool to help you. This calculator does not consider the curves and odd shapes of the interior that you may have. This is ONLY an approximation of the number of boxes you need. The Membrane calculator does give decimal values of boxes needed. Example: If your calculation comes to 2.18 boxes you may decide that you only need 2 boxes instead of ordering a 3rd box. If your calculation comes to 2.79 boxes you might want to go ahead and order that 3rd box.

FLOOR

Block external heat radiating from the ground and dampen noise from the road.

L
W

FIREWALL

Stop the engine bay heat from coming into your interior cab while quieting down the noise.

L
W

DOOR PANELS

Eliminate rattles while blocking out the heat. Pick from 2 door or 4 door options.

L
W

ROOF

Often overlooked, but this is directly where the heat from the sun comes through.

L
W

TRUNK

Wanting to use sound deadening for your audio equipment? Don’t just hush it, Membrane it!

L
W

TRUNK LID

Seal it all up in the one and only Thermal insulator and sound dampening material Membrane.

L
W

TRUNK CAB BACK WALL

Insulate your cab back wall from the heat. Make your Restomod Air A/C fully insulated in your cab.

L
W

HOOD

Create a barrier from the heat in your engine bay while quieting down noise with Membrane.

L
W

Estimated boxes of Membrane:


MEMBRANE IS DIFFERENT

Membrane is real thermal protection. Membrane’s 3mm of closed-cell installation foam rubber does a lot. When applied to your firewall there is a significant decrease in temperatures from your engine. We also found that custom car builders were using a standard “sound deadening” material in their builds, and were unaware that it did not provide adequate temperature adjustments from the outside elements.

Membrane,  is the only thermal insulation material with sound-dampening properties in one sheet. The 2mm Butyl Layer is for vibration damping and is proven to quiet the noise and rattles your vehicle produces. Membrane can be applied to floor, roof, doors anywhere to block out the outside noise.

Membrane four-layer material is like nothing else found on the market. Layer one is foil for durability, layer two is a closed-cell heat insulation foam rubber for thermal protection, layer three is another foil layer for structural integrity, and layer four is the butyl layer for sound dampening.
Membrane four-layer material that prevents your vehicle from being robbed of the climate temperature you have set in the cabin of the vehicle while giving you sound dampening properties. Use Membrane for the ultimate firewall insulation, hush sound in floorboards and doors, and as overall heat insulation and sound dampening for your custom car or truck.

Membrane is the only material that insulates, and sound dampens in one single application sheet. This is just not an add-on “liner” to place in the body of your vehicle to muffle and hush noise or rattle. Membrane is a true fortification between your car or truck cabin and the outside world.
There is no need to buy separate products to quiet the noise or block out the heat. Membrane does both in one single sheet. Don’t just hush it, block it!

Membrane is simple to use. Measure, cut, and peel to apply to your vehicle. Membrane conforms to all the curves and angles your vehicle offers, without having an odor or being messy like drip materials.
No one likes having to buy extra products to do the job the one you bought should have done. That’s why Membrane is becoming the leading choice of pro builders for their installs.

4 LAYER
DIFFERENCE

Membrane’s structure is different by design with a four-layer material in a single sheet. So what’s the difference?  Let’s begin with our top layer.

1. Layer one is foil for durability,

2. Layer two is a closed-cell insulation foam rubber for thermal protection,

3. Layer three is another aluminum foil layer for structural integrity for applying the material to your vehicle, and

4. Layer four is the elastomeric butyl constrained-layer multi-function sound deadener, for vibration damping & sound insulation.

4 LAYER
DIFFERENCE

Membrane’s structure is different by design with a four-layer material in a single sheet. So what’s the difference?  Let’s begin with our top layer.

1. Layer one is foil for durability,

2. Layer two is a closed-cell insulation foam rubber for thermal protection,

3. Layer three is another aluminum foil layer for structural integrity for applying the material to your vehicle, and

4. Layer four is the elastomeric butyl constrained-layer multi-function sound deadener, for vibration damping & sound insulation.

.